气相输运沉积制备c轴择优取向的碘化铋薄膜

铋基卤化物材料因其无毒和优良的光电性能而显示出巨大的应用潜力。BiI₃作为一种层状重金属半导体,已被用于X射线检测、γ射线检测和压力传感器等领域,最近其作为一种薄膜太阳能电池吸收材料备受关注。本文采用简单的气相输运沉积(VTD)法,以BiI₃晶体粉末作为蒸发源,在玻璃基底上得到高质量c轴择优取向的BiI₃薄膜。并通过研究蒸发源温度和沉积距离对薄膜物相和形貌的影响,分析了BiI₃薄膜择优生长的机理。结果表明VTD法制备的BiI₃薄膜属于三斜晶系,其光学带隙为~1.8 eV。沉积温度对薄膜的择优取向有较大影响,在沉积温度低于270 ℃时,沉积的薄膜具有沿c轴择优取向生长的特点,超过此温度,c轴择优取向生长消失。在衬底温度为250 ℃、沉积距离为15 cm时制备的薄膜结晶性能最好,晶体形貌为片状八面体。     

Analysis of a new multispecies tumor growth model coupling 3D phase-fields with a 1D vascular network

In this work, we present and analyze a mathematical model for tumor growth incorporating ECM erosion, interstitial flow, and the effect of vascular flow and nutrient transport. The model is of phase-field or diffused-interface type in which multiple phases of cell species and other constituents are separated by smooth evolving interfaces. The model involves a mesoscale version of Darcy’s law to capture the flow mechanism in the tissue matrix. Modeling flow and transport processes in the vasculature supplying the healthy and cancerous tissue, one-dimensional (1D) equations are considered. Since the models governing the transport and flow processes are defined together with cell species models on a three-dimensional (3D) domain, we obtain a 3D–1D coupled model.     

Imposing accurate wall boundary conditions in corrective‐matrix‐based moving particle semi‐implicit method for free surface flow

Corrective matrix that is derived to restore consistency of discretization schemes can significantly enhance accuracy for the inside particles in the Moving Particle Semi‐implicit method. In this situation, the error due to free surface and wall boundaries becomes dominant. Based on the recent study on Neumann boundary condition (Matsunaga et al, CMAME, 2020), the corrective matrix schemes in MPS are generalized to straightforwardly and accurately impose Neumann boundary condition. However, the new schemes can still easily trigger instability at free surface because of the biased error caused by the incomplete/biased neighbor support. Therefore, the existing stable schemes based on virtual particles and conservative gradient models are applied to free surface and nearby particles to produce a stable transitional layer at free surface. The new corrective matrix schemes are only applied to the particles under the stable transitional layer for improving the wall boundary conditions. Three numerical examples of free surface flows demonstrate that the proposed method can help to reduce the pressure/velocity fluctuations and hence enhance accuracy further.     

Two-dimensional topological semimetals

The field of two-dimensional topological semimetals, which emerged at the intersection of two-dimensional materials and topological materials, has been rapidly developing in recent years. In this article, we briefly review the progress in this field. Our focus is on the basic concepts and notions, in order to convey a coherent overview of the field. Some material examples are discussed to illustrate the concepts. We discuss the outstanding problems in the field that need to be addressed in future research.     

石墨基液流电池复合双极板

液流电池是一种安全性高、使用寿命长、可扩展的大规模储能系统,可以协助电网调峰储能,提高能源利用率,发展前景广阔。双极板是液流电池的重要组成部分。功能上起到了分隔、串联电池、传导电流、为电堆提供结构支撑等作用。从成本构成角度看,双极板的价格占电堆成本的比重也较大。开发高性能、低成本的双极板对加快液流电池的商业化应用具有重要意义,也是目前业界的迫切需求。虽然文献上报道了许多针对液流电池双极板开发的工作,但是目前高性能、低成本的液流电池双极板产品仍无法充分满足市场需求。本文着重介绍了石墨基复合双极板的研究现状,介绍了材料选择、工艺流程对关键性能的影响,对相关工作进行了评述,并为液流电池双极板的开发提出了建议。     

Classical solution for a nonlinear hybrid system modeling combustion in a multilayer porous medium

Combustion processes in porous media have been used by the petroleum engineering industry to extract heavy oil from reservoirs. This study focuses on a one-dimensional nonlinear hybrid system consisting of $n$ reaction–diffusion–convection equations coupled with $n$ ordinary differential equations, which models a combustion front moving through a porous medium with $n$ parallel layers. The state variables are the temperature and fuel concentration in each layer. Coupling occurs in both the reaction function and differential operator coefficients. We prove the existence of a classical solution, first locally and then globally over time, to an initial and boundary value problem for the corresponding system. The proof uses a new approach for combustion problems in porous media. The local solution is obtained by defining an operator in a set of Hölder continuous functions and using Schauder’s fixed-point theorem to find a fixed point as the desired solution. Using Zorn’s lemma, we extend the local solution to a global solution, proving that the first-order spatial derivative of the temperature in each layer is a bounded function.     

A self-powered and sensitive terahertz photodetection based on PdSe2

With the rapid development of terahertz technology, terahertz detectors are expected to play a key role in diverse areas such as homeland security and imaging, materials diagnostics, biology, medical sciences, and communication. Whereas self-powered, rapid response, and room temperature terahertz photodetectors are confronted with huge challenges. Here, we report a novel rapid response and self-powered terahertz photothermoelectronic (PTE) photodetector based on a low-dimensional material: palladium selenide (PdSe₂). An order of magnitude performance enhancement was observed in photodetection based on PdSe₂/graphene heterojunction that resulted from the integration of graphene and enhanced the Seebeck effect. Under 0.1-THz and 0.3-THz irradiations, the device displays a stable and repeatable photoresponse at room temperature without bias. Furthermore, rapid rise (5.0 μs) and decay (5.4 μs) times are recorded under 0.1-THz irradiation. Our results demonstrate the promising prospect of the detector based on PdSe₂ in terms of air-stable, suitable sensitivity and speed, which may have great application in terahertz detection.     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

Cytotoxic dimeric half-sandwich Ru(II), Os(II) and Ir(III) complexes containing the 4,4′-biphenyl-based bridging ligands

A series of dinuclear half-sandwich Ru(II), Os(II) and Ir(III) complexes [Ru₂(μ-Lⁿ)(η⁶-pcym)₂Cl₂](PF₆)₂ ( 1 , 4 ), [Os₂(μ-Lⁿ)(η⁶-pcym)₂Cl₂](PF₆)₂ ( 2 , 5 ) and [Ir₂(μ-Lⁿ)(η⁵-Cp*)₂Cl₂](PF₆)₂ ( 3 , 6 ), based on 4,4′-biphenyl-based bridging Schiff base ligands N,N′-(biphenyl-4,4′-diyldimethylidyne)bis-2-(pyridin-2-yl)methanamine (L¹; for 1 – 3 ) and N,N′-(biphenyl-4,4′-diyldimethylidyne)bis-2-(pyridin-2-yl)ethanamine (L²; for 4 – 6 ) is reported; pcym = 1-methyl-4-(propan-2-yl)benzene, Cp* = pentamethylcyclopentadienyl. The complexes were characterized by relevant analytical techniques (i.e. elemental analysis, FT-IR, NMR, ESI-MS), and their in vitro cytotoxicity was assessed at six cancerous and two non-cancerous (healthy) human cell lines. Overall, complexes 4 – 6 , containing the L² bridging ligand, revealed higher cytotoxicity as compared with 1 – 3 and, thus, they were studied in greater detail. The best-performing complex 6 exceeded at least twice the in vitro cytotoxicity of cisplatin and showed high selectivity towards the cancer cells over the normal ones, including the primary culture of human hepatocytes. In contrast to cisplatin, complexes 4 – 6 did not induce the cell cycle modification of the treated A2780 human ovarian carcinoma cells (studied by flow cytometry and Western blot analysis). High levels of superoxide anion were induced by complexes 4 – 6 at the A2780 cells. The levels of activated forms of Caspase-3 and Caspase-8 at the A2780 cells treated by Ru(II) complex 4 were comparable with cisplatin, while complexes 5 and 6 had only a minor effect on activation of these caspases.     

Photosensitive organic-inorganic hybrid structures based on porous silicon

Abstract

In this study, the photovoltaic organic-inorganic structures were created by deposition of poly(3,4-ethylenedioxythiophene) film doped by poly(styrenesulfonate) and reduced graphene oxide on the porous silicon/silicon substrate. Formation of the hybrid structure was confirmed by means of atomic-force microscopy and Fourier transform infrared spectroscopy. The current-voltage characteristics of the obtained structures were studied. It was found the increase of electrical conductivity and photo-induced signal in organic-inorganic structures. Temporal parameters and spectral characteristics of photoresponse in the 400–1100?nm wavelength range were investigated. The widening of spectral photosensitivity in a short-wavelength range due to light absorption in various layers of the multijunction structure in comparison with single crystal silicon was revealed.